Modern Bin single waste bin with a steel post and flange for ground anchoring, featuring a modern design for street furniture.
Components:
• Steel support post, shaped at the base to form a flange for ground anchoring;
• Rectangular waste container made from 1 mm thick sheet steel. The bin is hinged to the support arm to facilitate emptying.
The bottom of each bin is equipped with holes for rainwater drainage. Inside, at the four corners, there are bag holder hooks.
Single bin dimensions: 30 x 25 x 50h cm; capacity 38 litres.
Finish:
The painting process involves the following cycle: a coat of single-component zinc phosphate primer, followed by a finishing coat of highly protective two-component catalyzed paint.
Standard EUROCOMITALIA-type colour for the post and micaceous brown for the bin.
Painting in a custom RAL colour is available upon request.
Specifications
| height | 100 cm |
| capacity | 38 lt |
| Color | Antracite + marrone |
| Mounting | Bolt anchor |
| assembled | No |
| Material | Steel |
Surface protection
GENERAL INFORMATION ON SURFACE PROTECTION
All products undergo surface treatment and painting cycles calibrated according to the constituent material, product type, and final intended use.
Cast iron and aluminum surfaces are duly prepared by mechanical sandblasting or chemical pretreatment to ensure proper adhesion and protection of the coating.
Steel surfaces are protected by anti-corrosion treatments appropriate for the product's geometry and installation environment.
The coating is applied using a 5P cycle (thermosetting powder coating with electrostatic application) or a 3P cycle (spray painting with anti-corrosion primer and finish), depending on the substrate and performance requirements.
Standard finish: antique black, Eurocomitalia type.
Any color from the RAL Classic chart is available upon request.
Detailed technical specifications are available in the dedicated documentation.
Assembly instructions
GENERAL ASSEMBLY INSTRUCTIONS
All products are accompanied by specific assembly instructions for the model provided.
Each product, based on its nature and intended use, requires dedicated installation methods.
For detailed technical specifications, please refer to the dedicated documentation.
Screw protection
SCREWS AND BOLTS
All screws, bolts, and other fastening accessories are generally supplied in stainless steel.
DISCLAIMER
The data reported in the product sheets are the official data available at the time of publication and may be subject to change following technical updates made to the products.
The products may exhibit dimensional tolerances resulting from manufacturing processes, with a maximum deviation of 10% from the declared values.
EUROCOMITALIA reserves the right to make changes without prior notice and disclaims all liability for the accuracy and completeness of the content provided.
