Classic SMALL bin for urban furnishing, consisting of:
- Smooth circular steel support post, sealed with a PVC cap. Diameter 60 mm, thickness 2 mm.
- Cylindrical waste container made of 1 mm thick galvanized steel sheet, with a rounded, anti-cut top edge and reinforced with several ribs. The base is equipped with drainage holes for rainwater.
- Bag holder ring.
Total height: 1200 mm, of which 200 mm is for in-ground anchoring.
Bin height: 400 mm;
Bin width: 250 mm;
Capacity: 20 litres.
Specifications
| height | 100 cm |
| capacity | 20 lt |
| Color | Black |
| Mounting | In concrete |
| Material | Steel |
DISCLAIMER
The data reported in the product sheets are the official data available at the time of publication and may be subject to change following technical updates made to the products.
The products may exhibit dimensional tolerances resulting from manufacturing processes, with a maximum deviation of 10% from the declared values.
EUROCOMITALIA reserves the right to make changes without prior notice and disclaims all liability for the accuracy and completeness of the content provided.
Surface protection
GENERAL INFORMATION ON SURFACE PROTECTION
All products undergo surface treatment and painting cycles calibrated according to the constituent material, product type, and final intended use.
Cast iron and aluminum surfaces are duly prepared by mechanical sandblasting or chemical pretreatment to ensure proper adhesion and protection of the coating.
Steel surfaces are protected by anti-corrosion treatments appropriate for the product's geometry and installation environment.
The coating is applied using a 5P cycle (thermosetting powder coating with electrostatic application) or a 3P cycle (spray painting with anti-corrosion primer and finish), depending on the substrate and performance requirements.
Standard finish: antique black, Eurocomitalia type.
Any color from the RAL Classic chart is available upon request.
Detailed technical specifications are available in the dedicated documentation.
