Four-bay electric charging station for E-Scooters or E-Bikes.
Structure Composition: Steel module for holding electric scooters or bicycles; the base module contains 4 bays. Uprights are made of Ø 76 mm tubular steel, prepared for bolt-down installation.
In the center is a PLUG Module made of 110 x 110 mm tubular steel, containing 4 SCHUKO sockets for charging e-scooters or e-bikes.
PLUG Module for e-bike charging station.
Each PLUG includes a Schuko socket for charging and is also equipped with padlock holders, allowing users to park and secure their vehicle comfortably while it charges.
Technical Specifications:
4x Schuko sockets with IP67 protection
4x holders suitable for securing with a padlock (padlocks not provided).
Rated current: 16 A
Rated voltage: 230 V
Rated frequency: 50Hz
Socket type (category): flush-mounted socket
Protection rating: IP67
CIRCUIT BREAKER:
1x Magnetothermic differential switch Id 0.003mA
Trip delay time: INSTANTANEOUS
Rated current: 25/22 A
Compliant with standard: CEI EN 61008
Indicator light: voltage presence
The module can be extended or placed side-by-side to create up to a maximum of 6 bays.
Installation and Maintenance:
The feet are designed for anchoring with M10 steel bolts.
The surfaces are expertly protected using a 5P cycle and are powder-coated.
Padlocks not included. We recommend using a "U-lock".
Specifications
| height | 85 cm |
| Width | 20 cm |
| type | Per Monopattini ed e-bike |
| Power supply | Rete elettrica |
| capacity | 4 posti |
