A stylised cast iron pole with circular body elements, 7000 mm in height.
The pole features a base whose lower part consists of a wide circular band, supporting the central section which is also circular and has a truncated cone shape.
In the centre, there is a cast iron inspection door designed to house a terminal block on the inside.
The base is finished with a cone-shaped, truncated-cone ornament. Base height: 800 mm; base width: 390 mm.
The shaft is made of tapered, circular-section steel, with a diameter of 102 mm for the first section and 76 mm for the second.
The shaft is composed of tubes of various heights, including an 800 mm section for ground installation, or on request, with a flange for anchoring with bolts.
A thermosetting protective sheath is fitted at the base.
The taper is adorned with cast iron or aluminium collars, secured to the pole with grub screws.
The pole top is made of cast iron or aluminium and is fixed to the pole with stainless steel grub screws.
The pole is equipped with a double steel shepherd's crook top, COD 506, featuring a floral ornament in aluminium or cast iron. It is made from a round-arched bent steel tube (45 mm diameter, 3 mm thickness) as per the design. It is finished with an ornament, a bolt cover, and a 3/4" threaded tube fitting for the lantern.
The shepherd's crook arm is attached to the pole by ornamental aluminium or cast iron hooks and is decorated in the centre with acanthus scroll motifs.
The COD 622 lantern is attached to the end of the arm.
It is equipped with an M10 screw for grounding and a 55 mm diameter hole for the passage of an internal electrical cable.
All cast iron or aluminium elements are made from a single casting.
Surface protection
Assembly instructions
Screw protection
SCREWS AND BOLTS
All screws, bolts, and other fastening accessories are generally supplied in stainless steel.
DISCLAIMER
The data reported in the product sheets are the official data available at the time of publication and may be subject to change following technical updates made to the products.
The products may exhibit dimensional tolerances resulting from manufacturing processes, with a maximum deviation of 10% from the declared values.
EUROCOMITALIA reserves the right to make changes without prior notice and disclaims all liability for the accuracy and completeness of the content provided.