Pole Top for Luminaires TPLX2

Pole top for Luna-type luminaires, code TPLX2, made from a 40x25 mm tubular profile, shaped as per the drawing. 

At the upper end, the tube is welded at a 90° angle to another tube (40x25mm) and finished with a 180° steel arc measuring 30x5mm.

At the end of the arc, there are holes for mounting the luminaire.

In the center of the arc, connecting to the tube, there is a hole for cable routing.

The pole top is designed for mounting on 76 mm diameter poles and is secured to the pole using stainless steel grub screws.

Upgrading your existing lighting points is simple and cost-effective with our TPLUNA product.

Can be installed on any existing pole, regardless of diameter.

Various aesthetic solutions for 1, 2, 3, or 4 light fixtures, ensuring compliance with current standards.

Thanks to its tilting technology, the system allows the luminaire to be adjusted parallel to the road, even in situations where the mounting pole is not perpendicular  to the road (± 30°).

SURFACE PROTECTION 

Cast iron surfaces are thoroughly sandblasted before the painting process.

Steel surfaces are galvanized.

The painting process is as follows:

one coat of single-component zinc phosphate primer, followed by a finishing coat of highly protective, two-component catalyzed paint.

Standard color: EUROCOMITALIA-type antiqued black.

Upon request, painting in a custom RAL color is available.

HARDWARE

Stainless steel screws and accessories.