A traditionally styled pole made of cast iron, featuring circular body elements, with a total height of 7 meters and a light point height of 6 meters.
The pole consists of a base whose lower part is a wide circular band, supporting the central section, which is also circular with a truncated cone shape.
In the center, a cast iron inspection hatch is designed to house a terminal block on the inside.
The base is finished with a cone-shaped, truncated-conical ornament. Base height: 812 mm; base width: 388 mm.
The shaft is made of tapered, circular-section steel, with a diameter of 102 mm for the first section and 76 mm for the second.
The shaft is composed of tubes of various heights, with the first 800 mm section designed for direct ground burial or, upon request, with a flange for bolt anchoring.
A thermosetting protective sheath is at the base.
The taper is adorned with cast iron or aluminum collars, secured to the pole with grub screws.
The pole top is made of cast iron or aluminum and is fixed to the pole with stainless steel grub screws.
The pole is equipped with a double steel shepherd's crook arm top, CODE 505.2, made of a semicircular curved steel tube (45 mm diameter, 3 mm thickness) as per the design.
It is finished with an ornament, a bolt cover, and a 3/4" threaded pipe fitting for the lantern.
The shepherd's crook arm is attached to the pole with ornamental aluminum or cast iron hooks.
A lantern, CODE 622012, is attached to the end of the arm.
It includes an M10 screw for grounding and a 55 mm diameter hole for passing an electrical cable through the interior.
All cast iron or aluminum elements are made from a single casting.
Surface protection
Assembly instructions
Screw protection
SCREWS AND BOLTS
All screws, bolts, and other fastening accessories are generally supplied in stainless steel.
DISCLAIMER
The data reported in the product sheets are the official data available at the time of publication and may be subject to change following technical updates made to the products.
The products may exhibit dimensional tolerances resulting from manufacturing processes, with a maximum deviation of 10% from the declared values.
EUROCOMITALIA reserves the right to make changes without prior notice and disclaims all liability for the accuracy and completeness of the content provided.
